Home >> Products >> Trac Rail Products


Trac Rail Products

Click on images to enlarge


Trac Rail Products
Product Details

See our family of TRAC Rail products for all applications
Downloads



Home >> Products >> Condenser Rack


Condenser Rack

Click on images to enlarge


Condenser Rack
Product Details

Another Break Through Product By RCS to Save you Time & Money


The new Fast-Rac Roof Platform System takes about 15 minutes to install. Compare that to the labor and expense of purchasing and
installing a roof curb and curb support system. The Fast-Rac system installs in minutes not hours and will not void your roof warranty.
Fast-Rac is held in place using two utility clamps on each rib, so no fasteners will penetrate your roof panel.
US Patent Pending

  • Systems for all major roof types:
  • Trapezoidal Standing Seam Panes
  • Architectural Vertical Rib Panels
  • R-Panels (expose fasteners)


  • Benefits
  • 15 minute install
  • No Roof Curb
  • No fasteners in roof
  • No water blocked
  • Durable aluminum construction

  • Downloads



    Home >> Products >> Louvers


    Louvers

    Click on images to enlarge


    Louvers
    Product Details

    RCS offers a full line of Intake Louvers for industrial buildings. Most all of our louvers carriers the AMCA seal for air performance.
    This lets your customer know you will be providing a product that has been AMCA licensed with certified air performance and water penetration data.
    RCS can assist you in sizing your Intake requirements to properly balance intake with our exhaust fan package. We always recommend
    Extruded Aluminum, Drainable Blade Louvers, however galvanized louvers are available. We recommend galvanized louvers
    Only be used if they are painted.

    AMCA Standard 500-L-07, “Laboratory Methods of Testing Louvers for Rating”
    Establishes uniform test methods for louvers including air leakage, pressure drop, water penetration, wind driven rain and operational torque. Approved as an
    American National Standard on January 11, 2007.
    Downloads



    Home >> Products >> High Performance Acrylic Dome Skylight - New 51% Light Transmission


    High Performance Acrylic Dome Skylight - New 51% Light Transmission

    Click on images to enlarge


    High Performance Acrylic Dome Skylight - New 51% Light Transmission
    Product Details

    NEW Product offers Value and Performance

    High Performance Acrylic Dome Skylight - New 51% Light Transmission

    Our new High Performance Acrylic Dome series offers both Performance and Value.
    This is the best priced high performance unit on the market today.
    Do not overpay for undocumented claims about light distribution.
    Our New 51% Light Transmission unit offers the best skylight for the money.


  • Double Dome – White over Clear
  • Curb Mount
  • Mil Finish.078 extruded aluminum frame and .070 extruded aluminum glazing retaining angle
  • Integral 10 degree sloping condensate gutter with drainage slots
  • Optional frame colors are white and bronze
  • Custom colors available upon request.
  • Optional Security and Fall Guards are available


  • Note: Glazing materials are not designed to support the weight of a person.
    Downloads



    Home >> Products >> High Performance Prismatic Dome Skylights


    High Performance Prismatic Dome Skylights

    Click on images to enlarge


    High Performance Prismatic Dome Skylights
    Product Details

    High Performance Prismatic Dome Skylights

    Prismatic Dome Skylights are becoming popular in the market price. The reason for this
    is there are a lot of claims that Prismatic Dome Skylights Do a better job dispersing the,br> harvested daylight. RCS carries a full line of Prismatic Dome Skylights.
    in standard and custom sizes.

    Also available with impact resistant Sky Tough Outer Domes
    Downloads



    Home >> Products >> High Performance Sky-Tough Skylights


    High Performance Sky-Tough Skylights

    Click on images to enlarge


    High Performance Sky-Tough Skylights
    Product Details

    Advance Glazing Technology

    Manufactured by one of the world’s leading chemical companies, the Sky-Tough glazing material delivers an excellent
    shading coefficient with up to 60% light transmittance and excellent light distribution.
    The result is clearly a brighter, more eve, aesthetically pleasing light.


    Sky-Tough meets rigorous UL 972 standards for impact resistance.

    Downloads



    Home >> Products >> Standard Acrylic & Polycarbonate Dome & Pyramid


    Standard Acrylic & Polycarbonate Dome & Pyramid

    Click on images to enlarge


    Standard Acrylic & Polycarbonate Dome & Pyramid
    Product Details

    Standard Double Dome Acrylic Skylight

    If you are looking for value, our standard acrylic dome series offers a great price point.
    This is the best priced category unit within the skylight market . The standard double dome unit yields 36%
    Light Transmission and offers great value for the money. In some parts of the country such as the
    southeast and southwest 50% plus light transmission can overheat your building. Sometimes more is not better.


  • Double Dome – White over Clear
  • Curb Mount
  • Mil Finish.078 extruded aluminum frame and .070 extruded aluminum glazing retaining angle
  • Integral 10 degree sloping condensate gutter with drainage slots
  • Optional frame colors are white and bronze
  • Custom colors available upon request.
  • Optional Security and Fall Guards are available


  • Note: Glazing materials are not designed to support the weight of a person.
    Downloads



    Home >> Products >> Glass Skylights by Velux


    Glass Skylights by Velux

    Click on images to enlarge


    Glass Skylights by Velux
    Product Details

    Ideal for small spaces
    FMC Skylights are ideal for small commercial spaces


    Advantages of Glass
    Unlike Acrylic and Polycarbonate, Glass will not deteriorate or fade over time.

    Quality construction The FCM skylight is constructed of an insulated glass lens, combined with a durable metal frame that mounts directly to a site-built curb.

    Glass options
    Curb mounted skylights comes with your choice of:
  • Miami-Dade glass - Special safety glass by Velux designed to meet high velocity hurricane codes, including the stringent Miami-Dade code requirements
  • Impact Glass - Special safety glass designed to meet code requirements for hurricane prone areas
  • Laminated Glass - Tempered safety glass with extra laminated pane for added safety and comfort
  • White laminated glass - White laminated safety glass provides diffused daylight and energy efficiency

  • Downloads



    Home >> Products >> Commercial Tubular Sun Tunnel


    Commercial Tubular Sun Tunnel

    Click on images to enlarge


    Commercial Tubular Sun Tunnel
    Product Details

    Tubular Skylights for Commercial Applications by RCS

    RCS offers solution for Solar Tubes and floating standing seam roof systems

    Tubular Skylights are becoming a popular method to harvest daylighting into office buildings and homes.
    Tubular daylighting is an excellent way to bring natural light into commercial building with drop ceilings.


    Problem:
    Most Tubular Skylights today are offered with only fixed tubes. This can present a problem for floating standing
    seam roof systems used on metal buildings. The thermal expansion and contraction of the roof system can crack
    or break the connections of a fixed tube.


    Solution:
    RCS offers a solution to this problem with a flexible connection. This allows for the natural thermal expansion
    and contraction without damaging the tube. 98% highly specular reflective rigid tunnel

    Sun Tunnel™ skylight by Velux
  • 98% Highly specular reflective rigid tunnel with Prismatic Diffuser.
  • Tunnel has a 22” diameter.
  • Highly reflective tunnel.
  • 36” rigid top elbow, 30° offset.
  • Flexible bottom elbow, 24” fully extended (doubles as expansion joint).
  • 9” tall round-to-square adapter box.
  • Fast adjustment of tunnel length thanks to 60” telescopic design.
  • Compatible with drop, open, or hard ceiling applications.
  • Daylight controller optional.
  • Modular system can be purchased in three separate components.
  • 10 year warranty on product/25 year warranty on tunnel.

  • Downloads



    Home >> Products >> Adapter Roof Curb


    Adapter Roof Curb

    Click on images to enlarge


    Adapter Roof Curb
    Product Details

    Roof Curb Systems offers a complete line of HVAC and other adapters. Whether you are replacing an old HVAC unit, an exhaust fan or any other curb mounted equipment, we have an adapter to make this process much easier. Our adapters are designed using cutting edge 3D design that maximize performance but minimize mistakes and material usage. An adapter from RCS is a good solution for replacing an old unit quickly without performance loss.

    Standard Features:

    • Designed in house using cutting edge 3D design
    • No assembly required
    • Water tight continuous welded corners and seam
    • All welds coated with galvanizing spray
    • Heavy gauge galvanized steel construction
    • Lifting lugs at four points on adapters weighing 75lbs or more
    • ¾” Thick gasket material included for top and bottom of adapter
    • 1 ½” Fiberglass insulation

    Every adapter we manufacture is designed with three important issues in mind - quality, performance and cost. We design each adapter for optimal performance and value. In most cases, all you will need to provide is the existing and replacing unit model numbers. Roof Curb Systems also knows that time is of the essence when it comes to a unit replacement. We always offer expedited shipping, even during peak seasons.


    Downloads



    Home >> Products >> HVAC Roof Curbs Sloped & Flat


    HVAC Roof Curbs Sloped & Flat

    Click on images to enlarge


    HVAC Roof Curbs Sloped & Flat
    Product Details

    HVAC Unit Roof Curbs for Large Air Handling Units

    Roof Curb Systems maintains a vast electronic library of all major North American
    Manufactures of Roof Top HVAC Units. Our library contains drawings for all roof types
    both TPO Roof Systems and Metal Building Roof Systems. Roof Curb Systems can
    incorporate integral sloped condenser pans and eliminate pedestal equipment rails.
    Roof Curb Systems can fabricate custom curbs for large custom Air Handling Units.


    Custom Roof curbs with internal duct chases are available.
    Downloads



    Home >> Products >> Isolation Rails & Seismic Curbs


    Isolation Rails & Seismic Curbs

    Click on images to enlarge


    Isolation Rails & Seismic Curbs
    Product Details

    Vibration Isolation Rails and Seismic Curbs

    RCS carries Vibration Isolation Rails that are designed and engineered for use to reduce noise and vibration
    for roof curb-mounted mechanical equipment. Vibration Isolation Rails are available in 1” and 2” deflection
    and are compatible with most roof-supported equipment and standard roof curb systems without modification
    to the curb base. RCS isolation rails provide support, noise and vibration isolation, and are air and water tight.


    Typical applications include support and isolation packaged roof top HVAC units and other air-handling and
    refrigeration equipment. Isolation rails can also be used for large exhaust fans. Isolation rails are typically
    mounted directly on non-isolated roof curb systems.


    Vibration Isolation Rails are available in two styles:
  • Interlocking Aluminum Extrusion Construction
  • G-90 Galvanized Steel with Neoprene Seal


  • Seismic Curbs

    Seismic Curbs are available from RCS. We offer optional stamped calculations where required.
    Downloads



    Home >> Products >> Large Air Handling Unit Curbs


    Large Air Handling Unit Curbs

    Click on images to enlarge


    Large Air Handling Unit Curbs
    Product Details

    HVAC Unit Roof Curbs for Large Air Handling Units

    Roof Curb Systems maintains a vast electronic library of all major North American
    Manufactures of Roof Top HVAC Units. Our library contains drawings for all roof types
    both TPO Roof Systems and Metal Building Roof Systems. Roof Curb Systems can
    incorporate integral sloped condenser pans and eliminate pedestal equipment rails.
    Roof Curb Systems can fabricate custom curbs for large custom Air Handling Units.


    Custom Roof curbs with internal duct chases are available.
    Downloads



    Home >> Products >> Fan Curbs Standard & Vented


    Fan Curbs Standard & Vented

    Click on images to enlarge


    Fan Curbs Standard & Vented
    Product Details

    Fan Curbs for Conventional Roof Systems

    Roof Curb Systems can supply all your fan curb requirements
    Our CNC Turret punch allows us to manufacture vented
    louver curbs and extensions with fast turnaround times and lower cost.


    Standard Features
  • 18 Gauge G-90
  • Mitered corners
  • 1.5” X 3 LB density fiberglass insulation (vented curbs are non-Insulated)
  • Welds are zinc coated
  • Optional wood nailer

  • Downloads



    Home >> Products >> Security Grilles For Correctional Facilities


    Security Grilles For Correctional Facilities

    Click on images to enlarge


    Security Grilles For Correctional Facilities
    Product Details

    Maximum Security Supply or Return Grilles

    Standard Features:
    • Construction meets ASTM and ANSI standards
    • Face plate 3/16" steel perforated with staggered
    • 5/16” diameter holes on 7/16" centers
    • Standard sleeve of 10 gauge steel with continuously welded seams and stitch welded to face plate
    • Soft white power coated finish
    • Pre-Punched 1.5”x1.5” retainer angles



    Downloads



    Home >> Products >> 36 x 36 Roof Hatch


    36 x 36 Roof Hatch

    Click on images to enlarge


    36 x 36 Roof Hatch
    Product Details

    Our stock 36” x 36” sleeve-in roof hatch is less expensive than the commonly specified 30”x36” roof hatch. Our 36” x 36” sleeve-in design allows field flexibility in locating the opening direction as the entire unit can be rotated 90-180 degrees. The sleeve-in design also allows the erector to remove the roof hatch separately from the curb during roof curb installation. The 36” x 36” sleeve-in roof hatch can be combined with any curb style. Our 36” x 36” roof hatch is constructed of 0.080 aluminum. Aluminum construction offers an attractive maintenance free finish that never rusts.
    Downloads



    Home >> Products >> 48 x 48 Roof Hatch


    48 x 48 Roof Hatch

    Click on images to enlarge


    48 x 48 Roof Hatch
    Product Details

    Our stock 48” x 48” curb mount roof hatch meets the 2006 IBC requirements. Our stock 48” x 48” curb mount roof hatch design allows field flexibility in locating the opening direction as the entire unit can be rotated 90-180 degrees. The curb mount design also allows the erector to remove the roof hatch separately from the curb during roof curb installation. The 48” x 48” sleeve-in roof hatch can be combined with any curb style. Note: IBC 2006 requires hatches be 16 square foot. We interpret this to be 48”x48” as we understand the design intent was to allow a firefighter to access with O2 tank. However OSHA requires that the safety cage be 27” from center of rung to outside of cage at the top point and flare out at the bottom 4” to prevent hitting ones head on the cage.
    Downloads



    Home >> Products >> Stair Hatch and Other Products


    Stair Hatch and Other Products

    Click on images to enlarge


    Stair Hatch and Other Products
    Product Details

    Stair Hatches

    All RCS roof hatches designed for long, dependable service.
    Covers support a 40 lb/ft2) live load. The cap flashing, fully welded
    corners, thermoplastic rubber gasketing, fiberglass cover insulation
    and rigid fiberboard curb insulation ensure weather tightness and
    energy efficiency. RCS roof hatches are designed with the proper
    number of compression spring operating mechanisms to provide
    smooth, easy, one-hand operation. Compression spring tubes are
    made from an anti-corrosive composite material and all other hardware
    is plated sealed for corrosion resistance.


    Note: For Metal Buildings with floating standing seam roof systems a
    Double Curb System may be utilized.
    Downloads



    Home >> Products >> Extend-A-Rail Safety Post


    Extend-A-Rail Safety Post

    Click on images to enlarge


    Extend-A-Rail Safety Post
    Product Details

    Extend-A-Rail Safety Post

    Extend-A-Rail Safety Post creates easy and safe ladder access through roof hatches. The telescoping
    post bolts to the top two rungs fixed ladders, providing secure hand-hold and enables personal to
    enter or exit the roof hatch in an upright and balanced position


    Standard Features and Benefits

  • Adjustable mounting hardware accommodates most any ladder rung size or spacing
  • Telescoping design is balanced for ease of operation
  • Twist locks in the fully raised position to provide the user with a secure hand-hold
  • A quick and simple release allows the post to be easily lowered to its retracted position
  • Constructed from corrosion resistance anodized aluminum for trouble free dependable service.

  • Downloads



    Home >> Products >> Inside Mount Hatch Access Ladder


    Inside Mount Hatch Access Ladder

    Click on images to enlarge


    Inside Mount Hatch Access Ladder
    Product Details

    Standard fixed ladders are combined with safety cage protection. They are available in 10’-30’ before requiring a rest platform. By code, fixed ladders can be ordered up to 20’ tall without safety cage protection however RCS recommends safety cages for all ladders.
    Downloads



    Home >> Products >> External Mount Ladder


    External Mount Ladder

    Click on images to enlarge


    External Mount Ladder
    Product Details

    Standard fixed ladders are combined with safety cage protection. They are available in 10’-30’ before
    requiring a rest platform. We recommend ordering external ladders with a walk through to allow for a safer
    mounting. By code, fixed Ladders can be ordered up to 20’ tall without safety cage protection however
    RCS recommends safety cages for all ladders.
    Downloads



    Home >> Products >> Square-to-Rounds


    Square-to-Rounds

    Click on images to enlarge


    Square-to-Rounds
    Product Details

    Square-to-round covers are used when you have round pipe stack penetrating through the roof and transition to the roof curb. For pipe stacks 40” or less, the curb OD is 9” larger than the pipe diameter. The cover opening is made 3” larger than the pipe to allow for 1.5” thermal movement. The storm collar is attached to the pipe stack and sealed with caulk to complete the deal.
    Downloads



    Home >> Products >> Condenser Platform Covers


    Condenser Platform Covers

    Click on images to enlarge


    Condenser Platform Covers
    Product Details

    Platform covers are typically used to support condensing units of a split system.
    Downloads



    Home >> Products >> Equipment Access Covers


    Equipment Access Covers

    Click on images to enlarge


    Equipment Access Covers
    Product Details

    Equipment Access Covers are primarily used to lift equipment in or out of a building. They offer an alternative to expensive double door roof hatches.
    Downloads



    Home >> Products >> Tower Diverters


    Tower Diverters

    Click on images to enlarge


    Tower Diverters
    Product Details

    Tower diverters or sometimes referred to as elevator diverters are used to divert water around a large object. It is common for a new addition to be built against the eave of an existing building. We also occasionally see larger towers penetrating the roofs of industrial projects. For large units the side flanges may need to be wide enough to spill water into multiple ribs. This also depends on the amount of head water. Tower diverters can be fabricated as flat flange or Seam-In Style.

    Options vary depending on condition:

    • Diverter only (front side)
    • Diverter with small turn back
    • Diverter with side wall flashing
    • Diverter with side wall flashing and rear wall



    Downloads



    Home >> Products >> Security Grilles


    Security Grilles

    Click on images to enlarge


    Security Grilles
    Product Details

    Maximum Security Supply or Return Grilles

    Standard Features:
    • Construction meets ASTM and ANSI standards
    • Face plate 3/16" steel perforated with staggered
    • 5/16” diameter holes on 7/16" centers
    • Standard sleeve of 10 gauge steel with continuously welded seams and stitch welded to face plate
    • Soft white power coated finish
    • Pre-Punched 1.5”x1.5” retainer angles



    Downloads



    Home >> Products >> Accessories & Miscellaneous Items


    Accessories & Miscellaneous Items

    Click on images to enlarge


    Accessories & Miscellaneous Items
    Product Details

    RCS carries a full line of accessories.
    All RCS roof penetration systems are shipped with all required accessories
    so the erector will have everything required to install the roof curbs correctly.
    Downloads



    Home >> Products >> TRAC Rail Roof Curb Support System


    TRAC Rail Roof Curb Support System

    Click on images to enlarge


    TRAC Rail Roof Curb Support System
    Product Details

    TRAC Rail is used for new construction only. It was designed for any roof penetration such as Standard Curbs, Fan Curbs, HVAC Unit Curbs, Smoke Vents and Skylights. It can not be used for Retro-fit.


    Downloads



    Home >> Products >> TRAC Rail for Seam In Curbs


    TRAC Rail for Seam In Curbs

    Click on images to enlarge


    TRAC Rail for Seam In Curbs
    Product Details

    RCS enhanced our standard TRAC Rail to support the “curb fins” and provide a full width cross channel so the installer will have a solid backer plate. This eliminates the need to use panel lap plates.
    Downloads



    Home >> Products >> CEE-TRAC Roof Curb Support System


    CEE-TRAC Roof Curb Support System

    Click on images to enlarge


    CEE-TRAC Roof Curb Support System
    Product Details

    CEE-TRAC was originally designed to support the outer curb of a double curb system Double Curbs present a challenge of determining the exact field location and relationship of the structural I-Beams and purling. CEE-TRAC sets on top of the purlins, so notching is not required. Other good applications for CEE-TRAC are with buildings with inconsistent purlin spacing such are wind bands. CEE-TRAC with a high clip standing seam roof can be used with Standard Curbs such as Fan Curbs, smaller HVAC Unit Curbs (3 -71/2 ton) , Smoke Vents and Skylights. It can not be used for Retro-Fit conditions.

    Product Features:

    • Ships with sliding stirrups to allow thermal movement in both directions.
    • Front and rear flange support.
    • Elevates the Roof Curb to match the roof panel elevation.
    • Resists negative pressure.
    • Pre-Fabricated: Requires no field notching, assembly, or adjustments.
    • Can accommodate purlin or bar joist roof framing systems.
    • Double and Multi-Spans are available; the number of spans is determined by curb length.



    Downloads



    Home >> Products >> Retro TRAC Roof Curb Support System


    Retro TRAC Roof Curb Support System

    Click on images to enlarge


    Retro TRAC Roof Curb Support System
    Product Details

    The Retro-TRAC Roof Penetration System has been developed to address the same roof penetration concerns as the TRAC Rail with the exception that this system can be installed after the roof is in place. It can be used with Standard Curbs, Fan Curbs, smaller tonnage, (3-7.5 ton) HVAC Unit Curbs, Smoke Vents and Skylights.

    PRODUCT FEATURES:
    • Elevates roof curb to match roof panel elevation, low clip or high clip (thermal block).
    • Front and rear flange support.
    • Easy to install from underside
    • Ships as (2) 48” telescopic channels to accommodate purlins 36” to 60”.
    • Pre-Fabricated: Requires no field notching, assembly, or adjustments.
    • Can accommodate purlin or bar joist roof framing systems.
    • Double and Multi-Spans are available; the number of spans is determined by curb length.



    Downloads



    Home >> Products >> TRAC Riser Roof Curb Support System


    TRAC Riser Roof Curb Support System

    Click on images to enlarge


    Product Details

    The TRAC Riser System has been developed for Composite Roof Systems and Insulated Panel Systems. The TRAC Riser System supports and transfers the roof curb and roof top unit weight directly to the building structure. No weight is imposed to the roof panel or insulation board. The Riser section of TRAC Riser is factory set to elevate the roof curb to the roof panel elevation. This system, like the TRAC Rail System, must be installed before the roof goes on. It can not be used for Retro-fit conditions.

    Product Features:

    • Transfers all loads from the roof panel to the building structure.
    • Ships Pre-Assembled
    • Front and rear flange support.
    • Provides for a finished look on underside of Curb.
    • Elevates the Roof Curb to match the roof panel elevation.
    • Resists negative pressure.
    • Pre-Fabricated: Requires no field notching, assembly, or adjustments.
    • Can accommodate purlin or bar joist roof framing systems.
    • Double and Multi-Spans are available; the number of spans is determined by curb length.



    Downloads



    Home >> Products >> Seam to Seam Roof Curbs for Trapezoidal Roofs


    Seam to Seam Roof Curbs for Trapezoidal Roofs

    Click on images to enlarge


    Seam to Seam Roof Curbs for Trapezoidal Roofs
    Product Details

    This Seam to Seam style, also referred to as Seam-In curbs offers the best protection for roof penetrations. This curb actually becomes part of the roof where other curbs penetrate the roof. This style is required to comply with 20 year roof warranties by many major building manufactures within the metal building industry. The attachment to the rib is typically done with a seam cap provided by RCS. When constructed from 0.080 aluminum RCS offers a standard 20 year workman ship warranty. RCS offers a special version of our TRAC Rail Curb Support System for seam-In curbs.
    Downloads



    Home >> Products >> Seam to Seam Roof Curbs for Vertical Rib Roofs


    Seam to Seam Roof Curbs for Vertical Rib Roofs

    Click on images to enlarge


    Seam to Seam Roof Curbs for Vertical Rib Roofs
    Product Details

    This Seam to Seam style, also referred to as Seam-In curbs offers the best protection for roof penetrations. This curb actually becomes part of the roof where other curbs penetrate the roof. This style is required to comply with 20 year roof warranties by many major building manufactures within the metal building industry. The attachment to the rib is typically done with part of the existing roof panel rib. When constructed from 0.080 aluminum RCS offers a standard 20 year workman ship warranty. RCS offers a special version of our TRAC Rail Curb Support System for seam-In curbs.
    Downloads



    Home >> Products >> Seam to Seam Roof Curbs for R-Panel Roofs


    Seam to Seam Roof Curbs for R-Panel Roofs

    Click on images to enlarge


    Seam to Seam Roof Curbs for R-Panel Roofs
    Product Details

    This Seam to Seam style, also referred to as Seam-In curbs offers the best protection for roof penetrations. This curb actually becomes part of the roof where other curbs penetrate the roof. Installation is a shingle (under/over) .The side flange rib covers over the roof panel rib the same way a panel laps.
    Downloads



    Home >> Products >> Flat Flange with Loose Cell Caps


    Flat Flange with Loose Cell Caps

    Click on images to enlarge


    Flat Flange with Loose Cell Caps
    Product Details

    Flat Flange curbs offer great flexibility for new and retro-fit applications. For roofs with panels out of modulation loose rib caps and plugs can offer a good option. RCS will not recommend rubber or polypropylene or ABS plastic rib covers as the fasteners can cut into the cap base. RCS offers aluminum rib caps & plugs.

    Note: RCS will not recommend an over/over installation. If you order an over/over installation you must give special attention to the upper (ridge side) connection. Over time ice and water has the potential to erode the connection on the upper side
    Downloads



    Home >> Products >> Flat Flange with Fixed Cell Caps


    Flat Flange with Fixed Cell Caps

    Click on images to enlarge


    Flat Flange with Fixed Cell Caps
    Product Details

    Flat Flange with welded on rib caps and plugs are available from RCS. Flat Flange curbs with welded on rib caps and plugs can save the erector valuable installation labor and is cosmetically appealing compared to loose caps

    Note: When using curbs with welded on rib caps and plugs special attention must be given to roof curb sub-framing location. If the roof panels are not in perfect modulation welded on rib caps and plugs may not be the best choice.
    Downloads



    Home >> Products >> Internal Flange Roof Curbs


    Internal Flange Roof Curbs

    Click on images to enlarge


    Internal Flange Roof Curbs
    Product Details

    Internal Flange roof curbs are fabricated with the side flanges, rear flanges and rear rib covers turned to the inside. All fasteners at the side and rear curb wall are installed from to the inside. However fasteners at the front flange are still exposed.

    Note: Special attention to HVAC duct drops must be considered with Internal Flange roof curbs as the duct drops must be modified from factory specs to prevent hitting the internal flanges. Please coordinate this with your HVAC contractor./images/uploads/roofcurbs_metal_internal_flange/Internal Flange_Metal Roof Curb_Main_new.jpg
    Downloads



    Home >> Products >> HVAC Roof Curbs


    HVAC Roof Curbs

    Click on images to enlarge


    HVAC Roof Curbs
    Product Details

    HVAC Roof Curbs and Coordination is our specialty.

    Simply provide RCS with the make and model number. When you order a roof curb for a roof top HVAC unit we will build
    to the HVAC manufactures curb inside dimensions. All duct supports and required insulated condenser pans are included.
    RCS will tag the supply and return. Our duct kits can be removed and rotated 180 degrees for most units.
    Downloads



    Home >> Products >> Double Floating Roof Curb System


    Double Floating Roof Curb System

    Click on images to enlarge


    Double Floating Roof Curb System
    Product Details

    Double Curbs are typically used when: the roof top unit weight can not be supported by purlins and loads must be transferred to the main frames with I-Beams, roof top unit weight would not allow thermal movement of the Standing Seam Roof System if the units were placed on standard curbs attached to the roof, framed opening or HVAC ductwork requirements are larger than the purlin spacing.
    Downloads



    Home >> Products >> Vibration Isolation Roof Curb


    Vibration Isolation Roof Curb

    Click on images to enlarge


    Product Details

    The Vibration Isolation Roof Curb incorporates adjustable spring isolators and a roof curb into a single unit. The unit is constructed of structural steel and is designed to match the bottom of the rooftop unit. The isolators are custom sized and spaced to accommodate the weight and center of gravity for a minium of 90% isolation efficiency. It can be fabricated to any specific roof pitch. The unit is factory assembled and shipped in one piece.
    Downloads



    Home >> Products >> Melt-Out Heat Smoke Vents


    Melt-Out Heat Smoke Vents

    Click on images to enlarge


    Melt-Out Heat Smoke Vents
    Product Details

    - Meets FM test standard 4430 for heat and smoke vents. - FM product listing: 224A6-AM - Full open position of vent is obtained within 5 minutes after initial exposure to 500F - Complies with UL standard 793 for automatically operated roof vents for smoke and heat. - BOCA (’99), SBCCI (’99), ICBO (’97), IBC, IFC & NFPA 204 M(’98) requirements. - Metal building curb mount units or standard self-flashing units for conventional roofs. - Optional manual quick release operation and fusible link activation screen for use with sprinkler system.
    Downloads



    Home >> Products >> Fusible Link Heat and Smoke Vent


    Fusible Link Heat and Smoke Vent

    Click on images to enlarge


    Fusible Link Heat and Smoke Vent
    Product Details

    - Meets FM test standard 4430 for heat and smoke vents. - FM product listing: 224A6-AM - Full open position of vent is obtained within 5 minutes after initial exposure to 500F - Complies with UL standard 793 for automatically operated roof vents for smoke and heat. - BOCA (’99), SBCCI (’99), ICBO (’97), IBC, IFC & NFPA 204 M(’98) requirements. - Standard outside manual release. - Metal building curb mount units or standard self-flashing units for conventional roofs. - Optional three wall polycarbonate skylight lids with 0.40 u-value and McCade link used with Heat Detection Signaling and Operations.
    Downloads



    Home >> Products >> TRAC Rail for R-Panel


    TRAC Rail for R-Panel

    Click on images to enlarge


    TRAC Rail for R-Panel
    Product Details

    Need copy.
    Downloads



    Home >> Products >> Seam-In Trapezoidal SSR


    Seam-In Trapezoidal SSR

    Click on images to enlarge


    Seam-In Trapezoidal SSR
    Product Details

    Need copy.
    Downloads



    Home >> Products >> Conventional Roof Curb


    Conventional Roof Curb

    Click on images to enlarge


    Conventional Roof Curb
    Product Details

    Need copy.
    Downloads



    Home >> Products >> Actuators


    Actuators

    Click on images to enlarge


    Actuators
    Product Details

    When providing Side Wall Fans or Roof Exhaust Fans with a building, Motorized
    Louvers can be wired to open when the fans are switched on.
    Most Actuators are available as 120V or 24V.
    Downloads



    Home >> Products >> Up Blast Motor Outside Air Stream


    Up Blast Motor Outside Air Stream

    Click on images to enlarge


    Up Blast Motor Outside Air Stream
    Product Details

    Up-Blast Exhaust Fans

    Up-Blast exhaust fans are an excellent way to change air for large industrial buildings.
    Up-Blast fans offer the most cost effective solution CFM / Dollar. Available as motor outside air stream
    Downloads



    Home >> Products >> Wall Mount Fans


    Wall Mount Fans

    Click on images to enlarge


    Wall Mount Fans
    Product Details

    CE Series Industrial Fans

    (CE = Cabinet Exhaust)

    The RCS “CE: Industrial Sidewall Fan package is designed for use in industrial applications.
    Our package includes: Enclosed fan housing, Fan Guards and Shutters.
    Standard units are available from ½ hp to 5 hp (11,800 to 44,200 cfm). The motors on most CE series fans may be wired for either 115/230
    or 230/460 volts. These fans feature extra heavy-duty internal steel components with a durable powder coat finish.


  • All fans are mounted inside a minimum 20” deep enclosed Galvanized housing for easy field installation to cee channel framing.
  • The RCS “CE” fan package is shipped with factory mounted fan guards to meet OSHA requirements.
  • The shutter frames are constructed of heavy gauge powder-coated steel.
  • The 4” aluminum shutter blades are mounted with heavy-duty brass bushings to eliminate rust and corrosion.
  • Pre-Assembled Housing and Fan
  • Heavy Duty 4” Aluminum Shutter
  • Factory Mounted OSHA Fan Guard

  • Downloads



    Home >> Products >> Louvers


    Louvers

    Click on images to enlarge


    Louvers
    Product Details

    need copy
    Downloads



    Home >> Products >> Hoods


    Hoods

    Click on images to enlarge


    Hoods
    Product Details

    Wall Hoods are available with all Sidewall Fans and Louvers
    Wall Hoods should only be used in extreme conditions as fully drainable blade louvers
    will prevent rain from entering into your building without the need for Rain Hoods.

    Downloads



    Home >> Products >> Up-blast Fans


    Up-blast Fans

    Click on images to enlarge


    Up-blast Fans
    Product Details

    Up-Blast Exhaust Fans

    Up-Blast exhaust fans are an excellent way to change air for large industrial buildings.
    Up-Blast fans offer the most cost effective solution CFM / Dollar. Available as motor outside air stream
    Downloads



    © 2014 Roof Curb Systems All rights reserved.
    Home About Us Products Contact Us Employment News & Events Site Map Terms of Service